cbrn:CountDoseDataType

A data type that provides the measurement data from a count dose-capable encounter device.

Complex type information

Content

• Sequence [1..1]
  1. cbrn:RemarkText [0..*]    General comments or remark.
  2. cbrn:DetectorDesignatorText [0..*]    A description of the detector used to produce a measurement. Must use naming convention defined in the relevant specification document.
  3. cbrn:DetectorKindText [0..*]    Identification of the detector that collected the measurement. Must use naming convention defined in the relevant specification document.
  4. cbrn:LiveTimeDuration [0..*]    Effective time duration of a measurement in ISO 8601 format.
  5. cbrn:RadCountRateValues [0..*]    A list of count rate values from a radiation dose rate detector.
  6. cbrn:RadCountValues [0..*]    A list of raw counts from a radiation dose rate detector.
  7. cbrn:RadDoseRateValues [0..*]    A list of radiation dose rate values presented in dose units per hour (e.g. rem/hr, Sv/hr).
  8. cbrn:RadTotalDoseValues [0..*]    A list of total (accumulated) radiation dose values.
  9. cbrn:RadAbsorbedDoseRateValues [0..*]    A list of radiation absorbed dose rate values presented in absorbed dose units per hour (e.g. rad/hr, mGy/hr).
  10. cbrn:RadTotalAbsorbedDoseValues [0..*]    A list of total (accumulated) radiation absorbed dose values.
  11. cbrn:RadExposureRateValues [0..*]    A list of radiation exposure rate values presented in exposure units per hour (e.g. R/hr, uR/hr).
  12. cbrn:RadTotalExposureValues [0..*]    A list of total (accumulated) radiation exposure values.
  13. cbrn:RefCalibrationSpectrumID [0..*]    Reference to a calibration spectrum. There is no required format for the ID value.

Attributes

Used by

• Element cbrn:CountDoseData

Type inheritance chain

• s:ComplexObjectType
  • cbrn:CountDoseDataType