ManufacturingItemBaseType

Manufacturing Item Base Type for standards based detailing of a manufactured item

Complex type information

Content

• Sequence [1..1]
  from type ItemIdentificationBaseType
  ID [0..1]    Is the Identifiers of the given instance of an entity within the scope of the integration. The schemeAgencyID attribute identifies the party that provided or knows this party by the given identifier.
  RevisionID [0..1]    Is the revision of the semantically named document. The combination of the ID and its revision uniquely identifies the associated entity.
  VariationID [0..1]    
  ItemIDSet [0..*]    
  from type ItemInstanceIdentificationBaseType
  from group ItemIDsGroup
  CustomerItemIdentification [0..1]    Is the identifier provided by the customer for the item.
  ManufacturerItemIdentification [0..1]    Is the identifier provided by Manufacturer for the Item. One example may be the model number.
  SupplierItemIdentification [0..1]    Is the identifier provided by the supplier for the item.
  UPCID [0..1]    Allows an instance of an item to have a UPC identifier associated.
  EPCID [0..1]    Allows an instance of an item to communicate the ElectronicProductCodeID that it was assigned. The ElectronicProductCodeID is one of the major RadioFrequency Identifiers used.
  GTINID [0..1]    
  from group ItemInstanceIDsGroup
  UID [0..1]    Is a two dimensional data matrix bar code identifier. For example, a concatenation of a Cage Code and serial number.
  RFID [0..*]    Allows an instance of an item to carry any radio frequency identifier (RFID) that maybe used by a supply chain.
  SerialNumberID [0..*]    Unique serial number assigned to the given item instance by the manufacturer.
  SerialLot [0..*]    Is the Lot and Serial numbers for the items contained in the associated component by identifying the number of items and the uniques serial number of those items that belong to a given Lot.
  ReferenceDesignatorID [0..1]    Is the reference designator on a Drawing or BluePrint where the BOM is used. Is an identifier used to refer to an instance of the  Item (part number) in manufacturing instructions, engineering drawings and/or CAD models. ReferenceDesignator is also often known as an installation point. There will be a single distinct ReferenceDesignatorID for each instance of an Item, however multiple distinct ItemIDs could have the same ReferenceDesignatorID value within a BOM, such as for alternate parts or parts selected from a test-fit-and-select processes.
  FindNumberID [0..1]    FindNumber: is used as a shorthand for the ItemID (part number) in manufacturing instructions, engineering drawings and/or CAD models.  The FindNumber is the same for all instances of the Item.
  Lot [0..*]    Identifies the Lot that a given Item Instance belongs to.
  from type ItemInstanceBaseType
  Quantity [0..1]    Identifies the quantity of the associated service or item that is addresses by the component in which the quantity is associated.
  from group FreeFormTextGroup
  Description [0..*]    
  Note [0..*]    
  Classification [0..*]    Specifies the classification of an entity. An entity may be classified into multiple groups for different reasons. Examples of Classification include Commodity Codes, Freight Classifications, Product Line classifications and so on. Suggested Values are COMMODITY, FREIGHT, PRODUCT-LINE
  Specification [0..*]    Identifies the specification of an entity.
  HazardousMaterial [0..*]    Provides the Hazardous Material Code and description.
  Packaging [0..*]    Identifies the Packaging information for a given item. Note: The UPC here is the UPC of the packaging for a given item.
  Dimensions [0..*]    Provides the dimensions of the associated component.
  ExportControl [0..*]    
  HarmonizedTariff [0..*]    
  Trademark [0..*]    
  from group ReferencesGroup
  DocumentReference [0..*]    
  Attachment [0..*]    The Attachment represents binary data files that may be included within a BOD. These files replace the paper specifications and drawings attached to a BOD definition to clearly communicate design requirements. This Data Type is optional. Attachment usage is further defined by its position.
  CountryOfOriginCode [0..1]    Represents the identifier of the country of origin of an item, service or shipment
  1. Effectivity [0..*]    Specifies effectivity of an associated object. Effectivity is expressed may be expressed as: multiple ranges, values, time period or as associated to a specific Item.
  2. EffectiveTimePeriod [0..1]    A time period in which an associated object is effective.
  3. ExecutionTimePeriod [0..1]    A time period in which an associated object is executed.
  4. FixedQuantityIndicator [0..1]    Indicates whether the ItemQuantity is a fixed size and does not scale along with the quantity of the BOM or Routing being produced
  from group LotSizeGroup
  MaximumLotSizeQuantity [0..1]    Is the maximum number of items that can be put into a lot for this Item.
  MinimumLotSizeQuantity [0..1]    Is the minimum number of items that can be put into a lot for this Item,
  LotSizeMultiplerNumber [0..1]    Is used with the MinimumLotSize and MaximumLotSize. It contains the multiplier between the minimum and maximum manufactured lot quantities. For example, if the maximum lot quantity is 10,000 and the minimum lot quantity is 1000, the lot size multiplier could be 1000. This means the Item may be manufactured in lot sizes starting at 1000 and going up to 10,000 by 1000 increments.For example, 1000, 2000, 3000, etc. A lot of 4500, would not be allowed under these constraints.
  5. LeadTimeDuration [0..1]    Is the duration of time that is required to add to a manufacturing process to forecast availability of this Item.
  6. RequiredPercent [0..1]    This is the percentage of the total quantity on the Bill of Material that is required to be available before the manufacturing process can begin
  7. BackFlushedIndicator [0..1]    Indicates whether the associated quatities are backflushed or not.
  8. ActualIndicator [0..1]    Indicates if the associated quatities are reported as they happen.
  9. TrackingIndicator [0..1]    Indicates whether the related object is to be tracked
  10. ScrapIndicator [0..1]    Identifies the status of an item as a scrapped item

Attributes

Used by

• Element BOMItemData via derived type BOMItemDataType
• Element FinishedGoodItem via derived type ManufacturingItemType
• Element ManufacturingItem via derived type ManufacturingItemType

Type inheritance chain

• ItemIdentificationBaseType
  • ItemInstanceIdentificationBaseType
    • ItemInstanceBaseType
      • ManufacturingItemBaseType
        • extended by BOMItemDataBaseType
          • extended by BOMItemDataType
        • extended by ManufacturingItemType